Viva HealthcareViva Healthcare<div class="ExternalClassDA2FD70D9F5246AFBCDB3B3FFCF3C7ED"><p>​Designed, manufactured, and sold in Canada, Viva Healthcare is breaking the mould on your typical lotion tube. Using additive manufacturing allows Viva to minimize excess material in the production line, and any offcut materials are incorporated into moulding new products. <br><br>Every component in this product is manufactured and printed under the same roof, and once complete, Viva Healthcare uses reusable and recyclable packaging to ship their products and packs for optimal space efficiency.<br><br>Whereas most healthcare product packaging falls under an unclassified or unrecyclable material category, Viva designs for recyclability by making this tube exclusively out of polyproplene. Polypropylene is one of the msot readily recyclable plastics in North America today, and Viva innovates in their production with their tubes requiring 25-35% less energy to produce compared to typical industry tubes.<br><br>Viva takes a full-circle view to designing their packaging. Look for their recyclable tubes in a store near you!</p></div><div class="ExternalClass0DBA930EB7A84C15BF1E5986F8001924"><div><p>Viva Healthcare is innovating in the personal care aisle by introducing a polypropylene (plastic #5) tube for your lotions and gels. Cutting waste throughout their production, they're pushing the next generation of healthcare products designed for zero waste.</p></div></div>Injection Molded Recyclable Polypropylene Tubehttp://www.nzwc.ca/focus/design/portfolio/ProductImages/viva-tube-large.jpg, largehttp://www.nzwc.ca/focus/design/portfolio/ProductImages/viva-tube.jpg, Portfolio image

 

 

http://viva-healthcare.com/, Website<div class="ExternalClassDA2FD70D9F5246AFBCDB3B3FFCF3C7ED"><p>​Designed, manufactured, and sold in Canada, Viva Healthcare is breaking the mould on your typical lotion tube. Using additive manufacturing allows Viva to minimize excess material in the production line, and any offcut materials are incorporated into moulding new products. <br><br>Every component in this product is manufactured and printed under the same roof, and once complete, Viva Healthcare uses reusable and recyclable packaging to ship their products and packs for optimal space efficiency.<br><br>Whereas most healthcare product packaging falls under an unclassified or unrecyclable material category, Viva designs for recyclability by making this tube exclusively out of polyproplene. Polypropylene is one of the msot readily recyclable plastics in North America today, and Viva innovates in their production with their tubes requiring 25-35% less energy to produce compared to typical industry tubes.<br><br>Viva takes a full-circle view to designing their packaging. Look for their recyclable tubes in a store near you!</p></div><div class="ExternalClass0DBA930EB7A84C15BF1E5986F8001924"><div><p>Viva Healthcare is innovating in the personal care aisle by introducing a polypropylene (plastic #5) tube for your lotions and gels. Cutting waste throughout their production, they're pushing the next generation of healthcare products designed for zero waste.</p></div></div>Injection Molded Recyclable Polypropylene Tubehttp://www.nzwc.ca/focus/design/portfolio/ProductImages/viva-tube-large.jpg, largehttp://www.nzwc.ca/focus/design/portfolio/ProductImages/viva-tube.jpg, Portfolio image

 

 

http://viva-healthcare.com/, Websitehttp://www.nzwc.ca/focus/design/portfolio/ProductImages/viva-tube.jpg, Portfolio imagehttp://www.nzwc.ca/focus/design/portfolio/ProductImages/viva-tube-large.jpg, largehttp://www.nzwc.ca/focus/design/portfolio/ProductImages/viva-tube-small.jpg, small

Pre-use involves all the steps from cradle (the origin of the materials) to the customers door; manufacturing/production, distribution and sale.
Sourcing resources that are rapidly renewed through natural cycles can reduce dependence on non-renewable materials. This promotes natural production systems that can continue indefinitely (in theory).
It’s important to consider compostability from the beginning. Material chemistry, processing additives, and trace elements (e.g. inks) can affect how well a product or package exceeds standards for compostable certification. These will also affect whether the materials are suitable for another industry’s use (e.g. methane extraction).
Minimize the environmental impact of a product or packaging by reducing the volume and/or weight of materials used. This “dematerialization” can happen both by making the item itself out of less material, and by optimizing the raw material extraction and manufacturing processes to reduce the amount of material used.
Byproducts are the materials created during manufacture that are not used in the final item. Planning the next use of these byproducts by another industry, or internally, can contribute significantly to waste reduction.
Reduce energy use wherever possible. Renewable energy to power extraction and manufacturing reduces reliance on non-renewable sources. Using energy efficient machinery further cuts resource and energy costs.
Reducing weight of a product and its package can considerably reduce energy use during transportation and manufacture; however, reducing the weight should not jeopardize product life span through reduced performance .
A package should protect its contents, and inform and appeal to the consumer without using excess material. Together, the product and package should be strong enough to reach the consumer without damage. The more efficiently it is designed for transport, storage and display, the better it is at reducing waste.
Some manufacturing techniques produce less waste than others. Low waste manufacturing processes consider effluent and byproduct control to limit the spread of waste, minimize materials used (e.g. additive manufacturing) or find uses for by-products (e.g. cascading subtractive).
Transport happens at all stages of the life cycle. Considering relative greenhouse gas emissions from different modes of transportation - rail, ocean, air, road – can be an important step, and an easy one to optimize in the production chain.
Optimizing energy efficiency and encouraging eco-efficient appliances influence how much energy is used once a product or package is in the consumer’s hands.
Consumer preference analysis can determine whether a product or package is actually meeting its intended use; a well-designed product reduces the chance of premature disposal.
Instructions are an opportunity to communicate value to the consumer. If a customer doesn’t fully understand how a product or package works or needs to be maintained, it opens the way for breakage, under-use, and early disposal.
Design to increase product longevity reduces the number and frequency of replacements.
The more prominent, catchy, and clear disposal instructions are, the more likely the consumer will be able to reach the goal of reducing waste after use. Better designs will accommodate regional infrastructure capacity for waste disposal.
If taking the product or package apart is complex, it can limit or prohibit disassembly post-use. Designing with fewer parts and design for intentional disassembly increases re-use, reclamation, and recycling.
Design for direct reuse is more efficient than disassembly or recycling. This means creating a product that can be directly reused at the end of life, without extra processing.
Byproducts, effluent, and even post-use products and packaging can supply another industry’s production line. This is called industrial ecology, or industrial symbiosis, and is arranged apart from consumer/municipal recycling systems.
Designing a product for a specific waste stream (e.g. recycling, composting, methane extraction) is first-stage systems thinking; collaborating with the waste handling industry is the next. Ensuring there is an end market for the product and packaging post use, and that this market is available wherever the item is sold, is integral to optimizing end-of-life.
Designing for recycling is a basic and accessible way to reduce waste after use. The recycling industry collects commonly used materials, processes and sells them into a new system of production. This can be an energy and transport-intensive process, and usually results in downgrading of materials over multiple recycling cycles. Designing for optimal recyclability and up-cycling (recycling to a product of equal or higher value) is a next-level way to approach this principle.
Composting is the recycling of organic materials – biological nutrients to feed rapidly renewable resources. Not all products or packages can or should be designed to be compostable, but some industries are especially suitable for it, such as foodware and food packaging. Designing a compostable product requires careful consideration of materials, certification, and that the conditions required to compost are met in the market area.

 

 

<div class="ExternalClass07C1D87D9C3B47A3B4E32CBAB2219FDB"><ul class="fa-ul"><li> <i class="fa fa-circle fa-fw fa-small"></i> ​Made from recyclable polypropylene </li><li> <i class="fa fa-circle fa-fw fa-small"></i> 25-33% less energy used in production, compared to conventional tubes </li><li> <i class="fa fa-circle fa-fw fa-small"></i> Vertically integrated manufacturing </li></ul></div>100.0000000000001000111001110011010010recyclable